close
Features
4 - Channel Amplifier
Illuminated Power Switch
Automatic Clip-limiter circuit
Switchable low-frequency filter at 30 Hz
Operating Mode is: Stereo, Parallel or Bridge
Balanced Combo input connectors
Output connectors are speak-on jacks and binding post terminals
Low-noise, variable speed fan
Front panel LED indicating Signal and Clipping and Protection Status
Class D technology, switch power, light weight and high power
Manufactured under TS16949, ISO14001 certified management system
- Distortion (SMPTE-IM): <0.5%(THD, DIM, SMPTE)
- Frequency Response: 20Hz-20KHz +/- 0.1dB, -3 dB points: 10Hz-60KHz
- Damping Factor, at 8 ohms: >300
- 100Hz: > 500
- 1KHz: > 200
- 10KHz: >100
- Signal to Noise, 20Hz-20KHz: >105 dB/A
- VOLTAGE GAIN: 40x (32dB)
- Input Sensitivity @ 4 ohms: 1Vrms
- Input Clipping: 10Vrms (+22 dB)
- Input Impedance: 10K ohms unbalanced, 20K ohms balanced; 56 (36dB)
- CONTROL: FRONT: AC SWITCH, GAIN KNOBS
- REAR: LOW PASS FILTER, BRIDGE SELECTOR.
- Cooling: Continuously 7-variable-speed fan, rear-to-front air flow
- Load Protection: On/off muting, DC-fault load grounding relay. Internal fault fuses.
- Power EIAJ @ 1% THD. Both channels driven: 4 500W @ 4 O (EIAJ); 4 270W @ 8 O�(EIAJ)
- BRIDGE MODE: 2 1000W @ 8 O (EIAJ); 2 520W @ 16 O (EIAJ)
- Dimensions (WxDxH) 483 x�376 x�88.8mm (19" x�14.8" x 3.5")
- Weight 7.9 Kg (17.4lb)
全站熱搜
留言列表